Shipping Tube Instructions - RehairOnline.com - by Master Bowmaker Ron Forrester

Your FREE Shipping Tube
-Packing Instructions-

After receiving your shipping tube (as seen below), carefully cut the tape along the side marked “open this end,” then open the box and remove the foam block found in the top.
Inside the box, you will find a hard PVC tube with a sleeve inside of it. Remove the sleeve completely from the tube, and slide your bow into the sleeve FROG FIRST as seen in the picture below.
Return the sleeve to the tube, carefully sliding it down as far as it will comfortably go. There is already padding in the bottom of the PVC tube and the box itself so there is no need to remove the tube entirely. Once the bow is in the tube, tuck the excess part of the sleeve down into the tube and around the bow, as seen in the picture below. Then replace the large foam block you removed in the first step, then close and tape the box. That’s it! Your bow is ready to be shipped!!

	Home REHAIR EXPRESS FAQ Classifieds Shipping Info Contact Us
Free Shipping TubeHow Shipping Works How to Pack your Tube Common RepairsOrder A Rehair Online Leather Grip Winding French Polish Head & Stick Stick Bushing Head Spline Ivory Tip Tip/Tip FrogPearl Slide Pearl Eye Frog Eyelet FAQGeneral FAQ TestimonialsTestimonials	Your FREE Shipping Tube -Packing Instructions- After receiving your shipping tube (as seen below), carefully cut the tape along the side marked “open this end,” then open the box and remove the foam block found in the top. Inside the box, you will find a hard PVC tube with a sleeve inside of it. Remove the sleeve completely from the tube, and slide your bow into the sleeve FROG FIRST as seen in the picture below. Return the sleeve to the tube, carefully sliding it down as far as it will comfortably go. There is already padding in the bottom of the PVC tube and the box itself so there is no need to remove the tube entirely. Once the bow is in the tube, tuck the excess part of the sleeve down into the tube and around the bow, as seen in the picture below. Then replace the large foam block you removed in the first step, then close and tape the box. That’s it! Your bow is ready to be shipped!!
Copyright ©2007-2008 RehairOnline.com, LLC; ForresterBows, LLC; Ron Forrester, LLC